中文
  • Small single-layer blow molding machines produce small products such as bottles and cans, or some parts, with relatively simple structure and technology, and the price is not too high; while the large single-layer blow molding machine processes Large

  • 1. Use raw materials that contain an appropriate amount of anti-sticking agent. The raw materials do not contain anti-sticking agent. 2. Add anti-sticking agents or other materials with better lubricity to the raw materials, but be careful about the

  • Analysis of common failures of the molding machine during blow molding, the possible causes of no discharge or unstable discharge when the blow molding machine is turned on may cause the mold surface to be too cold due to the cold air for too long in

  • The heating process, this process is the heating of the raw materials, we must shorten the heating time to ensure the stable heating effect of the raw materials, so as to improve the efficiency of the heating process.

  • The pressure involved in the production process is defined as: clamping force and air compressor pressure value. These two pressure values, no matter which aspect has a problem, the pressure value fluctuates in the production process

  • Everyone knows that the control system controls the operation and production of the entire machine, and every step of the process and every action of the equipment requires the control system to command. Before production, we will input the correspon

目前在第1页, 共有2页, 共有10条记录 第一页 上一页 12 下一页 最后一页 跳转到
Contact us
  • 0763-4632398